xxp680

前幾天拿到網拍的FRC普利珠(8.5g)和KOSO大彈簧(1000轉)
勾引原廠是8.5g和800轉
因為大彈簧軟了再加上普利珠也差不多該換了(用了五千公里左右)
今天請學弟幫我換,我們去小p家換
他們家工具真的很多,怪手板手都有

[2t 排煙狀況]

正常: 幾乎不見煙或無煙, 略有白或藍煙

於熱車後狂噴煙, 出力明顯下降:

鼓煞是將輪鼓做成一中空鼓, 在這中空鼓內放置兩片煞車皮, 利用連動機構 ( 可能是連桿
或線 )使一凸輪頂開兩片煞車皮, 使其外頂住輪鼓相互磨擦達到制動效果.
鼓煞常見的問題除了需要調整間隙, 煞車皮到磨耗極限需更換之外, 因為鼓煞
是屬於半封閉式的結構, 所以煞車皮與輪鼓磨擦所產生的磨耗生成物需隔一段
時間給予清潔, 可保持不錯的制動效果; 另外輪鼓會因為常時間的與煞車皮磨擦

龍頭偏向有幾個狀況, 寫出來供大家參考:
1. 前叉外管的轉向: 因外管是可以轉動的, 兩外管受外力影響, 雖有輪軸或前土除
可以限制但還是會造成偏向, 這時可放鬆輪軸螺栓, 低速騎一小段直線, 會因為
前後輪的循跡性自然回正, 再鎖緊即可
2. 前輪本身不正圓: 鋼線框居多, 受外力影響或鋼線/螺栓疲勞或銹蝕鬆動造成失圓

About three months ago, Kerry and me went to Ruth's Chris Steak House eating for celebrating the anniversary of our relationship. I have already heard that it was a high class restaurant before. At the moment of my first step entering the restaurant, I could feel its different from others. Its atmosphere, service and price.

There was an election held recently. It's an election about magistrates and
councilors. There are so many parties but two primary parties in Taiwan. One is KMT, and another is DPP. Consequently, KMT won the election. As a matter of fact, the result can be forecasted, because the achievements of the goverment were barely satisfactory.

Recently I was crazy about one thing, a high quality helmet and the brand is
SHOEI. It's a famous brand. In the race of MOTO GP, you can see constants
wear the safety helmet with the brand of SHOEI everywhere. I like it very

Hello everyone, my name is Wayne. Now I'm a junior grade student in YZU, and I major in electrical engineering department. I come from Kaohsiung, and I graduated from KMSH.(港明高中)


I am interested in scooters and playing badminton or some sports I like just

Q1.CNC切削的結構就一定是好物，鑄造就比CNC差?
A1.沒這回事...翻翻機械製造的書，可以查到很多種鑄造方法
加上現在冶金技術也更加進步，鑄造製程不一定比CNC切削差
如果CNC切削是絕對好物...
那為何輪框不用CNC切削、缸套也來個CNC、曲軸也來個CNC，活塞也來個CNC

前幾天考完期中考,趕緊拿著跟東機車友買的showa310到永申換

前車主用了將近2000公里,東西品相還不錯